Sound CommanderTM

Locomotive Sounds Upgrade

Overview:
The Sound Commander is a low cost way to add sound to your locomotives.  Small size permits installation into Beeps, Buddy's, Switchers, and many PW loco's, yet delivers over 1 watt of output power.  Operates in conventional mode with horn / bell buttons, or in command mode when interfaced to compliant products. 

The Sound Commander product is complete kit including "low profile" speaker, speaker baffle, mounting supplies, installation manual, and connection cables for conventional and command operation.

Cool Features:
    Conventional and Command mode operation
    Volume Control from the CAB-1,  4 levels and mute
    Custom Sound Processor for field upgrades or enhancements
    Direct connection to the Beep Commander and AC / DC Commander
    Only 1.5" L  x  1.25" W  x  0.75" H

Additional Diesel Features:
    Prime Mover revs with 4 speed levels, 4 volume levels and mute
    Volume of Prime Mover and Warning Sounds individually settable
    Monitors 32/100 speed step selections to adjust rev level appropriately

Additional Steamer Features:
    Steam Idle sounds with Brake Compressor sounds
    Blow Off sound, controlled from the CAB-1
    Chuff cadence (4 unique chuffs) triggered from external chuff switch
    Volume of Chuff and Warning Sounds individually settable 

Conventional Mode Sounds:
 - Horn / Whistle
 - Bell (diesel or steam)
 - Coupler Clank (activated by Bell button)
Note: The Prime Mover Revs or Chuff cadence, and compressor sounds may be enabled in conventional mode by a jumper, however this may not work in all applications.

Command Mode Sounds:
 - Horn / Whistle
 - Bell (diesel or steam)
 - Coupler Clank
 - Compressor Sounds
 - Diesel - Prime Mover revs
 - Steamer - Idle steam sounds

Speed Monitor Selection (diesel only):
  32 speed step operation: AUX1 + 0 + AUX1 + 0 + BRAKE
100 speed step operation: AUX1 + 0 + AUX1 + 0 + BOOST