|
Home
American Flyer Chassis Re-Bushing
Cradles
Cross-bucks
Bell Retrofit Kit
DC
Conversions
TMCC Conversions
DC & TMCC Installation Price
List
TMCC Components and Descriptions
TMCC
Engine
Sounds
TMCC
Signal Enhancer
TMCC & American Flyer
Turnouts
How To Order
Order Form
Shipping Info
Contact Us
Feedback
Show Schedule
Links
MEMBER TCA
MEMBER NASG | |
|
Command Control
Enhancement |
|
TMCCtm
Compatible
High Current Controller designed for accessories and operating cars... |
Mini HC v2 Features
 |
Configurable Outputs
The Mini Commander HC v2 is the only command control receiver that has
configurable voltage and pulse durations for controlling your accessories.
All selection of the voltage and pulse settings are accomplished from the
CAB-1tm controller during the configuration phase. |
|
Soft Set Technology
tm
The Mini
Commander has exclusive “Soft Set Technology”; which allows you to change the
unit ID (1 to 99) and the voltage/pulse settings without installing a
program/run switch! |
|
Multiple Command Set
Responds to ENG
and ACC commands. When ENG is selected, uni-directional or bi-directional can
motors are supported. |
|
Built in Antenna
The built in
antenna will suffice for many applications. A connector is provided for an
extension antenna when the signal exposure to the built in antenna is not
sufficient. |
|
Small Size
The footprint
is only 1” x 2” in size. This permits installation into many operating cars.
No more operating tracks needed! When the Mini Commander is installed in the
operating car and trackside accessory, they become instantly movable to
anywhere on your layout. Simply pick up power from the constant track power
and use the accessory. |
|
Four Outputs
For maximum flexibility, 1 ultra high current (6.0A pulsed 2.0A continuous)
output, 1 high current (2.0A pulsed - 0.8A continuous) output, and 2 low
current (0.8A pulsed 0.4A continuous) outputs are provided. |
|
Multiple Output Functions
The outputs are capable of pulse, toggle, and strobe functionality. The high
current outputs are the most flexible allowing the voltage to be set (2-18v),
the output mode (pulse or steady), and while in pulse mode the length of the
pulse can be set (0.25 to 2.0 sec). The low current outputs work as on / off
outputs at a constant 9v. One low current output is capable of strobe
functionality. |
|
UCS tracks
|
Milk /
Livestock Cars |
|
WELCOME TO GOLDINHANDS
